-
### Describe the bug
I have 3 holyiot ibeacons I can only get 1 to publish to mqtt.
All 3 are seen in the espresense log.
Ive tried changing the mac and uuid in the holyiot app. (Is there maybe…
-
I have a NRF52810 chip (not SoC or devkit), how i can dev it.
What board will be selected?
P0.1(chip) is what pin in Arduino.
-
There is no `nrf52832.svd` file in the `nrfx/mdk` folder, which is unexpected given that all other microcontrollers seem to be represented.
```
user@comp mdk % ls *.svd
nrf51.svd nrf52810.svd nrf…
-
### The problem
I bought one of the recommended iBeacon trackers and noticed that the entities for Power, Signal and Vendor are not being displayed. This was the same whether the trackers were disco…
-
Please add support for TILE network.
It runs on android.
https://www.thetileapp.com/en-gb/how-it-works
PCB: https://www.youtube.com/watch?v=k-BTStjaxgw
-
This issue tracks the porting of boards and SoCs to https://github.com/zephyrproject-rtos/zephyr/issues/51833.
### SoC series: AGILEX
- [x] soc: AGILEX
- [x] board: intel_socfpga_agilex_socdk, …
-
### The problem
iBeacon never changes from "home" regardless if kilometers away or battery off.
### What version of Home Assistant Core has the issue?
Home Assistant 2022.10.1
### What was the las…
-
enough settings to use the crystal?
CONFIG_CLOCK_CONTROL_NRF_K32SRC_XTAL=y
CONFIG_CLOCK_CONTROL_NRF_K32SRC_50PPM=y
At the moment the consumption is too high 4.8mA = 4800ua
Should be around ~7.…
-
### Requirements
- [X] I've looked at the README 'Common Problems' section
### Have you checked this problem on the example app?
Yes
### FlutterBluePlus Version
1.28.8+
### Flutter Version
3.13…
-
#### Description
Flashing slot1 results in an unspecified error when using JLINK on nrf52840dk. This works with Openocd.
#### Steps to reproduce the issue
`BUILD_IN_DOCKER=1 BOARD=nrf52840dk …