-
In an attempt on getting a WiFi uplink in the nrf port i have experimented with cc3k and cc31k modules. Without to much success using cc3k. After ordering a cc3100 click module i finally made some pro…
-
Hello Everyone,
Correct me if I am wrong. According to this link: http://infocenter.nordicsemi.com/index.jsp?topic=/com.nordic.infocenter.s130.sds/dita/softdevices/s130/sd_resource_reqs/hw_block_in…
-
-
The last days I tried to gain access to the Nordic SDK below the mbed layer. My application needs tight timings and the mbed timers caused to much jitter. Therefore I tried going with the hardware tim…
-
#### Description
It turned out that some `periph_timer` implementations just masked IRQs on `timer_clear()`. If the interrupt condition then occurred later on, the IRQ flag was set but (due to bein…
-
-
https://github.com/supperthomas/rt-thread/actions/runs/5400782999
-
you can use the STM32 board of you to finish this "good first issue"
if there's no board in "bsp/stm32/",
you can create the bsp with docuement [How to make a STM32 BSP for RT-Thread](https://githu…
-
Hello,
I am wondering if there is any plan to support the http://www.st.com/en/wireless-connectivity/bluenrg.html chipset.
Because there are some interesting modules available like this one. ht…
-
We're starting to get a growing collection of variants for chips. Organizing this has been a standing design challenge. Navigating the nrf52 family in #3615 and the cfg issues in #3528 has renewed me …