-
#### Description
Default debian /etc/ntpsec/ntp.conf is used upon first boot
#### Steps to reproduce the issue:
1. Deploy SONiC image via ONIE
2. Wait for system complete intiializatio…
-
```
What steps will reproduce the problem?
1. Install ntpclient
2. Confirm Time Has Been Synced
3. Reboot Router
What is the expected output?
It should be synced to current time and date as it was …
-
### What do you need help with?
I have created a UDP tunnel for the NTP timing that the Apple TV uses, as well as a TCP tunnel for the event channel and the data channel that use the new ports every …
-
If connection gets closed due to external event
error is experienced after attempt to send 'ntpData'.
Connection should be only closed if open :)
Details:
```
dgram.js:420
throw new Error('Not …
-
I am using the library with ESP32 and I found that if you put an incorrect ntp server (I assume it happens even if the connection to the internet is absent) the esp 32 restarts.
What I found is that …
-
Reportedly NTP packets are being sent out of a device using a wrong source IP address - 10.114.102.1. This is the address of the `resin-dns` interface. In theory this should never happened, but was re…
-
### Vaultwarden Support String
### Your environment (Generated via diagnostics page)
* Vaultwarden version: v1.32.5
* Web-vault version: v2024.6.2c
* OS/Arch: linux/x86_64
* Running within a cont…
-
### Board
ESP32 Dev Module Breakout Board (aliexpress version)
### Device Description
I have an ESP32 Wroom Breakout Board and Ethernet Module with W5500 IC connected trough SPI and CS pin attached…
-
Using Ethernet.h and NTP.h with an Arduino Uno R3 and an Ethernet Shield R3.
NTP client won't receive responses from remote NTP server when local/source UDP port is 123.
Changing line 54 to use…
-
During my preparation of #2235, I noticed a "redundancy" between `ntpd` and `chronyd` on the system when the user toggles the NTP service ON. Briefly, `chronyd` is active by default, and configuring a…