-
[chown@mbp ~/Downloads/gps-sdr-sim (master *)]$ bladeRF-cli -l hostedxA9-latest.rbf
Loading fpga...
Successfully loaded FPGA bitstream!
[chown@mbp ~/Downloads/gps-sdr-sim (master *)]$ bladeRF-cli -…
-
Hello,
I'm trying to update firmware. When I run
```
bladerf-cli -p
probe: No devices are available. If one is attached, ensure it
is not in use by another program and that the c…
-
I'm having random issues working the two RX channels of the Blade A4.
Code summarized below, running under Ubuntu 18.04 / bladeRF lib 2.4.0-git-a3d5c55f / FPGA v0.11.0 / FX3 v2.3.1
``
status = blad…
f4gkr updated
3 years ago
-
I am looking to pre-calculate the i/q phase and gain corrections for specific frequencies and load them before acquiring samples. Do the set_correction and get_correction functions work properly for t…
-
I have installed the BladeRF driver from source through this link https://github.com/Nuand/bladeRF/wiki/Getting-Started%3A-Linux
Then I have installed srsRAN from source through https://docs.srsran.…
-
This is a useful application. I forked it because I need pipes support. While I'm digging around, I noticed that QTKit is deprecated. I'm just about done moving it to AVFoundation. Do you want me …
-
./blade_recorder 2400.0 56 60 55 0.5 10
Negotiated USB 3 link speed
FPGA version: 0.14.0
Firmware version: 2.4.0-git-a3d5c55f
Using bladerf2 serial number 90aa89283cc3495e9aa506b20b0f40a9
Frequen…
-
## Issue Description ##
Refer to https://github.com/srsran/srsRAN_4G/issues/1247
I have been suspecting Radio interface as issue since I see very flaky and intermittent attach with bladeRF 2.0 …
-
I have been trying to get time synchronized output from 2x BladeRF 2.0 micros xA4 using trigger functionality but there is a random delay in samples between both streams. My setup is as follows:
I …
-
Is Lime mini compatible with gr-gsm?
uild# grgsm_livemon
linux; GNU C++ version 6.3.0 20170221; Boost_106200; UHD_003.009.005-0-unknown
[WARNING] SoapySSDPEndpoint failed join group udp://239.2…