-
Such error occured in HA log:
```
Logger: pyit600
Source: /usr/local/lib/python3.8/site-packages/pyit600/gateway.py:279
First occurred: 21:39:03 (1 occurrences)
Last logged: 21:39:03
read fa…
-
### The problem
Hello,
I see the following report in the log while OpenTherm gateway is trying to communicate to the HW, when setting are read or write.
During this all OpenTherm's sensors became "…
-
### The problem
When starting the system (with "Reboot system" in HomeAssistant OS or just plugging in the power), the OpenTherm Gateway integration will always have "Failed to set up". This does n…
-
It is not a bug, but i can't understant some parametrs in HomeAssistant:
1. Emergency target tempetature - as i anderstand it is a temperature when the boilel starts heating if the Use Emergency sl…
-
My gas boiler: Viessmann Vitodens W-100 B1KC 26 kW has exhaust temperature sensor. Would be great to see this information in opentherm gateway...
-
Wemos D1 reboots about every 10 seconds
Reboot log
2023-02-02 19:48:17 - reboot cause: Exception (2) - Access to invalid address (28)
ESP register contents: epc1=0x40241688, epc2=0x00000000, epc3…
-
### The problem
Hi,
I'm trying to add my OpenTherm Gateway to Home Assistant. I have a working gateway that is working via otmonitor either via the USB-serial connection or directly from TCP using…
-
Hello,
Just wanted to know if it's possible to avoid sending any data to the data bus, but only listening on it ?
I don't want to interfere with my manual wireless thermostat that comes with my boil…
-
Прошивка: v1.4.0-rc.16
Установил согласно документации ID 4
сущности в HA прокинулись, вижу температуру теплоносителя, могу через HA изменять уставку, но котел всегда на паузе.
OpenTherm sett…
-
### The problem
An log item about the PyOTGW appeared when the connection to my OpenTherm Gateway was somehow disconnected - it's connected to the network by an UTP cable, and no power failure or pow…