-
Currently jack_netsource doesn't support IPv6 address for -H option.
Fix that, please.
-
### Describe the bug
Updated the latest code from the openwrt library, from 5.15 to 6.6. After compiling and upgrading, it was found that WAN and WAN6 could not obtain IP addresses. The reset or im…
-
### Describe the bug
Wireless network statistics and status are not working, neither in LuCI nor in terminal tools. No matter the operating mode, client or access point, there is no activity inform…
-
I have update to openwrt according to the guide, but there seems to be a significant wireless problem. There is no any wireless infomation in overview or network tab. And there is no /etc/config/wire…
-
CheckPoint Safe@Office 1000n:
Quite similar just with slower 300MHz CPU and SFP connector but without WLAN. Discovered the same internal serial tty config as you did this morning (j14 jumper short,…
-
### 详细叙述
使用最新源码编译的固件，在配置好WiFi后只有2.4g正常工作，5g显示设备未激活
### 重复 issue
- [X] 没有类似的 issue
### 具体型号
MI-R3G
###…
-
On multiwan UI, it would be useful to have the sticky option available in the rules drawer.
This option is tipically used with https traffic and ensures persistence of connections on the same WAN (e.g…
-
反馈bug/问题模板，提建议请删除
## 1.关于你要提交的问题
Q：是否搜索了issue (使用 "x" 选择)
* [ x] 没有类似的issue
## 2. 详细叙述
### (1) 具体问题
A：升级后，eth0网口无法使用，插线灯不亮 退回老版本后正常
### (2) 路由器型号和固件版本
A：
型号 openwrt-ramips-mt762…
-
### Describe the bug
The ROM of this device is 128MB and 256MB RAM. I noticed that I am only able to use 64MB (58.6MB) for installing the software in '/overlay' partition. In the storage section, t…
-
*legale:*
Device: Beeline SmartBox flash (RAMIPS MT7621, 128mb NAND)
Version: OpenWrt 5.10.87
Commit: https://github.com/legale/openwrt/commit/99dd68bcedd0796c240511d2383cbd1232e9cd89
Start syst…