-
Hi,
n7nix Uronode install script fails :
URONODE_VER="2.10"
cd /usr/local/src
wget http://downloads.sourceforge.net/project/uronode/uronode-$URONODE_VER.tar.gz
Fortunately I found htt…
f6bvp updated
2 years ago
-
I'm new to gr-iridium and the Iridium Toolkit, attempting to build my own Iridium sniffer using Ubuntu 22.04 and HackRF. Following recommendations, I've installed GNU Radio 3.10. When I ran the follow…
-
### Firmware Version
2.5.0
### What did you do?
Favorites not sticking after favoriting
### Expected Behavior
Favorite nodes should stick
### Current Behavior
After some time it will forget f…
-
### Category
Other
### Hardware
Rak4631
### Firmware Version
2.4.0.46d7b82
### Description
When attempting to set a new url on a remote note, which includes a change in LoRa channel slot, the r…
-
Example Factory project: **WiFi_LoRa_32_V2_FactoryTest**
This error happens in several lib files (not only in my main one)
#### **error: 'HELTEC_BOARD' was not declared in this scope**
And if…
-
Hello. I am trying the lorawan code on heltec wireless paper and it works fine. But when I add the code for e-ink display to it , both display and lorawan doesn't work. Please advise. Thanks
-
My Direwolf is configured as an RF->Igate and Igate->RF digipeater. Xastir connects via AGWPE.
If I send an APRS message from my phone (K1MLN-7) over APRS-IS,to my Xastir client (K1MLN), Direwolf g…
-
```
> dmrconf -D ttyUSB0 -R DR1801UV write '2024-07-22 DR1801 01.yaml'
Warning in ***@***.***: Verification Issue: Warn: In : The support for this radio is still under development. Some features may…
-
### Describe the bug
When MSP frame with large payload is requested ie
48 (0x30) MSP_LED_STRIP_CONFIG (length 130)
52 (0x43) MSP_ADJUSTMENTS_RANGES (length 208)
52 (0x54) MSP_OSD_CONFIG (length…
-
Hi,
I try to communicate with this EnOcean Thermostat,
I can read packet, but i can't set a new target temp.
I think the problem was link to the learn function.
My question is probably stupi…