-
Hello, I would like to ask, I am testing with two direct computers (static IPs on the same subnet). I modified the `dst_ip` in `mra.py` to the IP of nginx installed on Kali, and sent it according to t…
-
Could also be considered a feature request?
TL;DR: Control packets are sent during start up that inconsistently make servos and cause unwanted behaviour in builds, but cannot be influenced by the c…
-
### What is your ISP? (if relevant)
KPN
### Diagnostic Information
Output of ifconfig -a:
root@UCG-Max:~# ifconfig -a
br0: flags=4163 mtu 9216
inet 192.168.1.1 netmask 255.255.…
-
### qBittorrent & operating system versions
qBittorrent: 4.6.6 x64
Operating system: Windows 10 Pro 22H2 Build 19045.4780 x64
Qt: 6.4.3
Installer: `qbittorrent_4.6.6_x64_setup.exe`
### What…
-
Hello!
I'm experimenting with Raspberry Pi, SPI-connected NRF24L01 module and this library.
In NRF24L01 promiscuous mode I see some data on RX, but I definitely don't see packets from my Logitech mo…
-
Hello
We have sometimes wrong gust speeds because our Tempest gets water spray which seems to lead to these wrong readings. I've posted this on the Tempest Owner forum and one suggestion was to use…
-
### In raising this issue I confirm that
- [X] I have read the [documentation](https://docs.pivpn.io)
- [X] I have read and understood the [PiVPN General Guidelines](https://github.com/pivpn/pivpn…
-
Execute the command and paste the result below.
Command: `uname -a && php -v && composer info | grep hyperf && php --ri swoole`
```bash
Linux vip-pay-5cc94c5b87-bhhg2 5.4.119-19-0009.11 #1 SMP …
-
### Description
The documentation says the following about the [configin . rdy](https://opentitan.org/book/hw/ip/usbdev/doc/registers.html#configin--rdy) bit:
> This bit should be set to indicate …
-
Hello OpenC3 COSMOS Developers! I hope you are having a good day.
My company has a lot of hardware that outputs PCM packets following the IRIG Chapter 4 and 10 telemetry standards. I am trying to d…