-
I need to recompile PAt because some command from PTC.go are not implemented in my Swiss-PTCII pactor III modem
When trying to compile i get this error
> Running tests...
can't load package: pack…
-
Hey there!
I'm hoping someone can help. I've been following the steps in the online quickstart and am having no luck being able to open the UE4 project.
I'm using UE4.22.3 and Wwise 2019.1.2.7…
-
pactor_debug output below shows the sequence. The code does the QSY before the Pactor modem has finished it's session shutdown sequence, in this case by about 5 seconds, which means that the radio is…
-
This issue is only for documentation purposes to keep track of changes in v0.7.1.
More info available at harenber/ptc-go#19.
-
Pactor modem must be in main menu (cmd:) in order to execute the initialisation commands successfully.
Throws error message (unfortunately not captured) when for example in PACKET menu (pac:)
20…
-
Ref [recent discussion](https://groups.google.com/d/msgid/pat-users/70eff718-47f6-d5d9-3473-5c99ee67718d%40gmail.com) regarding use of Pactor compression.
@harenber said:
> I completely agree. As …
-
Hello,
I am using etl in crc calculation.
I use crc16_ccitt with intial value 0xFFFF. But I need support for crc16_ccitt with intial value 0x0000.
I have created copy of policy with intial valu…
-
Hi Torsten,
this package currently catches interrupt signals to implement abort/disconnect.
https://github.com/harenber/ptc-go/blob/master/ptc/pmodem.go#L331
A more idiomatic approach would be …
-
It would be nice to be able to generate the code needed to request a GRIB file on SailDocs.
We use Pat and Winlink/Pactor to communicate.
Therefor a simple Textbox showing the code to be copied and…
-
Hi Martin,
after setting up the gpsd daemon, I tried to compose a new position report in the web GUI. Unfortunately it does not take the current position reported by gpsd.
Using the command line ```…