-
## Feature description
Allowing Home assistant to trigger an alarm state on the paradaox alarm panel from any Device linked to home assistant, in this case a Sonoff Binary motion sensor or door s…
-
## Alarm system
Describe your panel model (ex: EVO192, Spectra SP4000, Magellan MG5050), access mode (Serial, IP150, etc..).
## Environment
- Windows, Linux, RPI...
- Python version
## Gi…
-
When viewing the MQTT topics in MQTTlens I am only getting data on `paradox32CTL/out` but no data on the zone topics such as `paradox32CTL/hassio/0/zone1`. Also, even the 'out' topic does not seem to…
-
Hi MnrGreg. Now that Homekit is working I've tested it a bit and noticed that when I manually Stay-Arm at the panel it returns a CurrentState of 1 (i.e. Away_Arm state) on both the Pi terminal and on …
-
## Feature description
- EVO192 supports alarm triggering in versions 7.15+
- SP/MG supports alarm triggering in versions 7.10+
Implement an MQTT endpoint to send a message to alarm.
-
Multiple connections
## Feature description
Can we get Swan connection with different panel user, I have Isight Gold on 3 x smart Devices and they all can connect at the same time without any lock…
-
### Describe the issue you are experiencing
Home Assistant Yellow with RPI CM4 8GB RAM - so maxed out.
Since updating the supervisor to 2024.11.x and then the core to 2024.11.x, Home Assistant CPU…
-
Hi there, I am trying to connect a NodeMCU running the code on my Paradox alarm system. I followed the diagram (As far as I know) and as soon as I connect the CLK (Yellow wire) to the pin, the blue li…
-
Hi, I've been using this script with an SP6000 and up to now I've to say it is really working well: really a great job!
Just wondering if it is possible on program start to get the current status of …
-
Hi just want to let you know, that there are special code that you can enter durring the IP 150+ module configuraiton, which allows you to use the module in LAN mode, without forcing or using SWAN s…