-
**Describe the bug**
After flashing the reTerminal with a different RPi OS other than the factory OS, LEDs and Buzzer do not work anymore.
**To Reproduce**
Steps to reproduce the behavior:
1. Fl…
-
* arduino-esp32 version: [2.0.0](https://github.com/espressif/arduino-esp32/releases/tag/2.0.0)
* ODROID-GO version: 4a496e337d16bca4ddedbeca3486d7b60662d017
When compiling the Hello\_World exampl…
-
ESP питается от 2.5 до 3.6В.
Attiny85 питается от 1.6 до 5.5В
```
Li-Po:
- требуется преобразователь
- требуется зарядка
Батарейки АА 2 шт:
+ цена
- емкость
Батарейки АА 3 шт:
+ цена
…
-
Hey dude,
im trying since long time to get the odroid hc4 to work with archlinuxarm and aarch64.
Manjaro first alpha unstable release worked with petitboot, after the "stable" release and also…
-
Hi,
I received Watchy on July 1st.
After following your instructions, Watchy has been frozen on the menu screen.
https://github.com/sqfmi/Watchy/issues/252#issuecomment-2204482586
Resetting s…
-
```
Looks like lots of function are identical for DS1307, MCP 794X and PCF 8563.
i2c device address is different and MCP series has some additional functions
like storing the power failure and resum…
-
Hi,
I've tried to enable the deep sleep condition on the Edge Control Board, but the results are bad and not different from the normal sleep function: the board consumption doesn’t fall under 3 mA,…
-
I do not have much info (yet), I'll try to narrow down as much as possible until it is clear what happens:
mt76 causes OOPS on a regular basis on my bananapi R4 board with a mt7915e adapter.
Strange…
-
After setting up arduino IDE as per instructions (July 9) I tried uploading the 7Seg example and recieved the following:
A fatal error occurred: This chip is ESP32 not ESP32-S3. Wrong --chip argume…
-
Hello all, I got my T5-4.7" S3 a week ago and it's a bit of a let down. Straight out of the box I notice a few lines of vertical dead pixels, ghosting on writing text and each time the screen refreshe…