-
Hey,
I wanted to know if it's possible to use positioning and cellular at the same time with SIM7000G ? You only mention SIM7070 not supporting that, but I couldn't find examples on position and cell…
-
I'm getting the following errors when trying to run (Windows 10 & latest stable esp-idf if that matters):
```
E (1262) event: system event loop not initialized via esp_event_loop_init
I (1312) wifi…
-
I trying Quectel EC25 and ESP32-S3 with USB connection.
I have a successful PPP connection within the 4g_hotspot example with the config shown below.
CONFIG_BRIDGE_MODEM_USB_VID=0x2C7C
CONFIG_BRI…
-
### Answers checklist.
- [X] I have read the documentation for esp-protocols [components](https://github.com/espressif/esp-protocols#readme) and the issue is not addressed there.
- [X] I have updated…
-
## Environment
- Development Kit: Custom PCB
- Module or chip used: ESP32-WROOM-32E (8MB)
- IDF version: 4.3.0
- Build System: CMake
- Compiler version : xtensa-esp32-elf-gcc (crosstool-NG esp-2…
-
Hi,
I have used MQTT_VPN(https://github.com/martin-ger/MQTT_VPN) on several projects for testing. The result is quite impressive for small size UI project.
The idea of this MQTT_VPN is to allow…
-
Hi,
my tt-go is successfull registered with my model 2019 outlander phev.
But after ntp sync, it looks like it's crashing. Any ideas, whats wrong?
Tried with and without MJ18 Support.
```
I (…
-
I am using SIM5320 which has same AT Commands as the SIM800 only supports 3G.
I am able to communicate with the device using the UART directly, but unable to get any response using the gsm module.
…
-
### Answers checklist.
- [X] I have read the documentation for esp-protocols [components](https://github.com/espressif/esp-protocols#readme) and the issue is not addressed there.
- [ ] I have upda…
-
Dear @tomojitakasu ,
I’m working with rtkrcv but I get some problems with nrtk corrections (in particular MAC corrections which are sent through rtcm3 standard protocol). In particular if I use cor…