-
```
What steps will reproduce the problem?
1. attiny sketchbook/hardware per http://hlt.media.mit.edu/?p=1229
2. ATtiny85 selected as board in Arduino IDE
3. Upload using usbasp programmer
What is th…
-
```
What steps will reproduce the problem?
1. attiny sketchbook/hardware per http://hlt.media.mit.edu/?p=1229
2. ATtiny85 selected as board in Arduino IDE
3. Upload using usbasp programmer
What is th…
-
```
What steps will reproduce the problem?
1. attiny sketchbook/hardware per http://hlt.media.mit.edu/?p=1229
2. ATtiny85 selected as board in Arduino IDE
3. Upload using usbasp programmer
What is th…
-
```
What steps will reproduce the problem?
1. attiny sketchbook/hardware per http://hlt.media.mit.edu/?p=1229
2. ATtiny85 selected as board in Arduino IDE
3. Upload using usbasp programmer
What is th…
-
```
What steps will reproduce the problem?
1. attiny sketchbook/hardware per http://hlt.media.mit.edu/?p=1229
2. ATtiny85 selected as board in Arduino IDE
3. Upload using usbasp programmer
What is th…
-
```
What steps will reproduce the problem?
1. attiny sketchbook/hardware per http://hlt.media.mit.edu/?p=1229
2. ATtiny85 selected as board in Arduino IDE
3. Upload using usbasp programmer
What is th…
-
```
What steps will reproduce the problem?
1. attiny sketchbook/hardware per http://hlt.media.mit.edu/?p=1229
2. ATtiny85 selected as board in Arduino IDE
3. Upload using usbasp programmer
What is th…
-
```
What steps will reproduce the problem?
1. attiny sketchbook/hardware per http://hlt.media.mit.edu/?p=1229
2. ATtiny85 selected as board in Arduino IDE
3. Upload using usbasp programmer
What is th…
-
@Obijuan, @cavearr, there are two boards in boards.json that have platform restriction. The platform linux_armv7l doesn't seem to be supported anymore (see https://github.com/FPGAwars/apio/issues/460#…
-
As described in datasheet of ATTiny3216, it is possible to make hardware reset with low voltage, but configuration must be enabled by fuse.
On menu UDPI, i have only "No Reset" or "reset enabled for …