-
The feature "autoquit" does not seem to work. When the forwarder is detecting a link failure on UDP protocol the forwarder does not terminate and cannot reboot.
>
> 08:06:51 INFO: [TTN] bridge.e…
-
When using the LoraServer OS, the GPS works from the LoraServer website, the GPS works. However, I installed the rak_common_for_gateway and did not make modifications. The GPS does not work with thi…
-
I am using IN865 band in India and setup Node/gateway. I am not clear about the configurations we need to modify for IN865 band on the existing otaa/abp sample codes. Any kind of inputs on this IN 865…
-
Hi there,
What's the process to get our gateway added here - https://www.loraserver.io/lora-gateway-os/overview/
Thanks,
Aaron
-
I am trying to run a minimal example as suggested in #122. I can see a join accept in the TTN console but the device does not receive any events. Here is the full log:
```
[DBG ][LSTK]: Initiali…
-
Hi,
- i download lora-gateway-os-full-raspberrypi3--20190423151801.sdimg.gz
- Write it to SD card 8GB
- Connect RPi 3 Model B Ver 1.2 via Ethernet cable to computer (192.168.1.2) and serial l…
-
Hi,
thanks for your great work with the backplane. It is very versatile and great to use!
However, I am missing one feature: The support for a GPS module with PPS signal. It would be great if you ca…
-
I am attempting to get this working on the Adafruit feather M0 Lora. I have a sketch working perfectly with an older version of this library: https://github.com/matthijskooijman/arduino-lmic, basicall…
-
Dear all,
I'm a newbie with LoRa technologies and LoRaWAN.
I'm planning to deploy a simple network using LoRaWAN. I'm going to use RAK831 and Raspberry Pi for Gateway side. Sensor Node: I'm goin…
-
I am very new to LoRa tech (but very linux knowledgeable) so I may be ideal to sort out documentation issues :-D
Will the station2pkfwd stuff be what I need to connect my rpi/rak831 gateway to the …