-
Hi @HomeKidd
I am using the new USB-C PCB and got a similar issue as #16 with both 2.10 and 2.11.
1. The display never works like described in #16. I am able to change the display type. But ser…
-
Recently I updated to latest esp-open-rtos (I was working with a version from july 2016), and after adapting my code to the changes, I found that my application crashes. Just after accepting a TCP con…
-
**Thanks for the recent batch of work, I think a lot of these changes are very positive.**
I wanted to give some feedback to help steer the work before the next release.
First, I think the addit…
-
Hi,
I had worked a lot you your great code (but also I've made some mess in...), and I was looking to what seem be a miscalculation in the checksum. Actually I have a mismatch between the checksum ca…
-
we used the SDK and its bootloader form expressif before ,Can we upgrade our firmware to this version through OTA?
-
I'm trying to make ENC28J60 work with NodeMCU. I followed the connection instructions and I'm using the 2N3905 transistor for decoupling GPIO15 along with 3.3k resistor. NodeMCU boots fine but from Se…
-
Hello,
I'm using repeater firmware using 2 ESP8266 12E module. I have connected the 1st ESP with router.2nd ESP is connected with 1st ESP using 1ESPs SSID and password. 3rd ESP IS connected with 2nd …
-
I have installed the images onto two NodeMCU ESP8266s
The first configured as an AP, and works fine
The second I tried to configure an an Repeater with automesh
That one however never seems to work…
-
Tried using ota_basic example.
It still loads rom0 after TFTP put.
Seems memory link file does not working.
-
Hi!
I need to build the Mongoose-Os firmware to upload it using esptool.
That is documented in the following link:
https://github.com/cesanta/mongoose-os/tree/master/fw/platforms/esp8266
The p…