-
As far as I can see, there's only the colorcode on the resistor that tells us the value.
As it's just a simple pullup, you can use any value between 1k ohm and 10k ohm. I'm using 10k ohm and it works…
-
For whatever reason we decided that the 4 resistors in the middle-ish of the boosterpack should be removed. So, there probably shouldn't be holes for them at all.
robz updated
10 years ago
-
Many rc radios does not support charging from pd type c port. PD does not provide 5v at any time, it waits for pull-down resistors on CC1 and CC2 pins. Please add basic pd support to Hardware Requirem…
-
-
Hi Maarten!! just read IAQ-core P datasheet from AMS ans they talk about use 4k7 Ohms resistors with SDA / SCL and VCC.
I want to mount one IAQ and would know if u use the resistors berfore mountig.…
-
It looks like you are missing the CC resistors which will prevent it being detected by the host when used with C-C cables. I have a written a guide that shows how to connect up type C connectors which…
-
TSCircuit is a TSX interface for designing schematics and PCBs.
Each TSX component eventually renders down to a builder.
```ts
export const Resistor = () => {
return {
return grou…
-
Hi All
I have sensor mounted directly on board but get no readings
![image](https://user-images.githubusercontent.com/19796221/203951648-6c325bd8-dec3-443c-8cf5-858ecc6c793c.png)
and it lo…
-
Does this project follow the USB Specification for the host implementation? Im having trouble understanding if it requires 15k (changed to 14.5k - 24.8k) resistors and if there something that needs to…
-
Hello,
great project. How do you know you need to use resistors in connections to most of db9 pins? Why do not you use diodes like i.e. 1N4148?