-
I can not find the RF24 library. links are broken
-
Hi mciupak, I'd like to use your driver for RF24 radios.
How can I communicate with the driver from a c program running in user space?
Do you have any example code?
Thanks, Andrea
-
Breadboard build only works with a single radio attatched to the spi channel. Built with nodemcu wroom32 and using nrf24l01 + modules and breakout boards. I have only a single channel scope so I am un…
-
i got a message while compiling the code on Arduino IDE.
`#include
#include
#include
#include
const uint64_t pipeIn = 0xE8E8F0F0E1LL; //pipe address must be same with transmitter
RF24 radi…
-
Hi Josh, I need to get this transmitter module working with mono/C# on a raspberry pi 4. This is part of an effort to create a few thousand transmitter nodes for www.spacespeak.com Does your code wor…
-
Hardware using:
- ESP32 DevKit V1
- RF24l01+
Both components works (previously checked with other programs)
I tried to install in the ESP32 the Gateway working in Ethernet mode. It works with cu…
-
Hi,
I am using NRF24L01 with Arduino using the RF24 library (https://github.com/maniacbug/RF24).
While executing the transmission code I have observed the following line takes about 30 to 30ms t…
-
Page 8 of `RF-NANO Operating Instruction_V.1.1.pdf` contains an error in the text, which will cause endless headaches for developers trying to use the nRF24L01+ radio.
the CE and CSN pins are reverse…
-
Hi,
Sometimes, `ioctl` function into `SPI.cpp` is waiting (freeze) the communication.
It happen on :
``` cpp
uint8_t RF24::get_status(void)
{
uint8_t status;
csn(LOW);
status = spi->transfe…
-
This library is not maintained by anyone. If you wish to get any support or updates please go to:
https://github.com/TMRh20/RF24