-
I'm using flrig as the common interface point for cat control of my IC-746Pro. As best I can tell, pat does not support FLRig directly but it does support rigctld which in turn supports flrig as a rig…
-
When pointing to fldigi via hamlib on x86 4gb the app will stick to a crawl even just clicking Test will drag it
-
I'm trying to set this to work with my IC-7100, as it's my sole radio.
Thus far, I've found that if I change the rig value to be 370, baud to 19200, and swap /dev/ttyUSB0 for /dev/ttyACM0, I can ge…
-
Where are the bandColors located? I tried to update ~./config/sdrpp/config.json and replace origional bandColors with your ConfigBandColorsModification.txt colors. I save my work, but when I spawn SD…
-
I'm controlling the frequency of CubicSDR using "rig control" with "Hamlib net rigctl" device selected. Commands are being sent through a rigctld server on port 4532. It works great. But if you send a…
tkzic updated
7 years ago
-
For now cabrillo seems to have some hard-coded format. Which for example now is not for CQ WW RTTY contest enough.
Would be nice if there will be column definitions or sets or something like "defau…
-
So far rig-remote assumes that every rig provides the same features.
This may not be always true.
We may want to defines rig profiles and endpoints.
- a profile is a collection of capabilities (freq …
-
I am using rigctld with a FT-857D with an USB-adapter using following command line:
`rigctld -m 122 -r /dev/ttyUSB0 --set-conf=serial_speed=9600 -vvv`
When the USB adapter is disconnected (or fa…
-
Usecase:
There are current production radios such as the IC-2730A that will do V/V,U/U,V/U dual concurrent receive with separate audio outputs for VFOA and VFOB. One could do 70cm PBBS + 2m APRS us…
ctand updated
4 months ago
-
**Describe the feature you would like**
Some sort of API in order to start automated demods. Or even better a remote controller of the application.