-
Error message:
```
Displaying message: Building desktop package orangepi-jammy-desktop-xfce_1.0.2_all info
Displaying message: Creating board support package for desktop info
Displaying message: …
-
I disabled desktop service
sudo systemctl stop lightdm
sudo systemctl disable lightdm
Also, I made sure the ssh service is running and enabled
sudo systemctl enable ssh
sudo systemctl start …
-
I'm using a Radxa CM3 module on a Raspberry Pi CM4 IO Board.
I built the image as described, and flashed it onto the internal eMMC.
The board starts U-Boot SPL, but then hangs after verifying the ch…
-
The Debian CLI image `radxa-zero3_debian_bullseye_cli_b3.img` doesn't work on a Zero 3W. Kernel hangs after `rockchip-dmc dmc: could not find power_model node` log message.
Flashed on an SD card:
…
-
## About
Support for new android based ereaders (ie: with e-ink screen) in KOReader.
## Intro
Android has no APIs for e-ink screens or warmth lights. Each vendor implement its own methods.
…
-
-- Configuring done
-- Generating done
-- Build files have been written to: /home/cat/Desktop/rknn_yolov10/yolov10_rknn_Cplusplus/build/build_linux_aarch64
Consolidate compiler generated dependenci…
-
I am a chemical engineer by trade but am well-versed in compiling various python / cpython modules. I have OPI-3b with `DietPi` installed
```
OS: Debian GNU/Linux 11 (bullseye) aarch64
Host: Rockch…
-
### Creating a feature request
#### Is your feature request related to a problem? Please describe:
I often find it useful to get a system very close to what I want on multiple systems and then use…
-
After this commit: https://github.com/HaxeFoundation/hashlink/commit/21ede72a8abbc39b71c3c3607eca7c8a5d688d28
Log
```haxe
04-28 16:01:09.103 F/DEBUG ( 2210): #53 pc 000000000008b810 /apex/com.and…
-
Any experience when the G285 gets stuck in MASKROM mode? Currently will not accept any flash for the bootloader. This seems to be a common issue for the G285 Bobcat. The G290/295 do not seem to be as …