-
la66.h mentions lora mac commands set in config.h, but cant see anywhere in repo? is there a template somewhere that I use to create or is this created during compiling?
Sorry if basic question I'm b…
-
Currently, block headers have an additional field that labels whether or not they are valid.
See [modules/telemetry/v1/block.py](https://github.com/CarletonURocketry/ground-station/blob/main/module…
-
Hi, First of all, thank you for your great work. I am using USRP in the 868.3MHz frequency (sample rate =1M) and I can get the packet correctly. I am trying to get the Lora signal and save it in a fil…
-
## Implement driver RFM69HCW 915 MHz Radio Module
Note: It is possible that this issue will be found to be unnecessary at some point in the future. We originally intended for these modules to be us…
-
With an ESPEasy entry in the [LoRaWAN Device Repository](https://github.com/TD-er/lorawan-devices), it is extremely easy to add a new end device to the TTN v3 network.
![image](https://user-images.gi…
-
(originated from Mattia Gallacchi)
Deploy soo on the new SOO.mp V2 CM4 based board
- [x] Test SPI to UART IC
-
What firmware of the RN2483 are you running, 1.0.5 or an earlier version? And what settings did you use on TTN side for the device?
I'm having some issues where the RN2483 sometimes doesn't give a …
-
As soon as I add #define P016_P035_Extended_AC to custom.h, I get a compile error:
'StaticJsonDocument' was not declared in this scope
my Custom.h:
```
#ifndef ESPEASY_CUSTOM_H
#define E…
-
After flashing a file compiled using Custom.h, the access point does not appear, the STA mode is turned on.
If you compile the normal version, the access point works
I used esp8266
INIT : Boo…
-
"Microchip transceiver IC
Likewise Microchip has the chip RN2483"
Microchip only exposes an uart interface so SPI is going to be useless here I think.