-
@wwarthen I note that you have changed the CTS operation in v3.4.0-dev.9 and I think that has caused a side-effect with minicom.
minicom has hardware flow control enabled.
The steps are:
1. P…
-
Add, please, XON/XOFF support to serial port drivers.
-
It seems that there is a problem transferring files from Teraterm to ROMWBW's CP/M2.2 using XM.COM (and XModem in Teraterm). I was using the SC130 z180 board. With ROMWBW v3.0/v3.0.1 it is working fla…
-
Hi! I'm attempting to run FUZIX on an emulated RC2014 with a TMS9918A. FUZIX seems to boot correctly, if I disable the TMS9918A and PS/2 emulation then it boots to a login prompt over the SIO. But whe…
-
Hello,
I'm still struggling to initialize my SD card, but during debug I found this in the `send_cmd() @ diskio_sd/source/diskio_sd.c `
```
[...]
if (cmd != CMD0 || cmd != CMD12) { /*…
-
I used a 16GB micro SD card in a SD card adapter and dd'ed the hd1k_combo.img to the SD card.
Using Linux on my RPi4:
```
sudo dd if=hd1k_combo.img of=/dev/sda bs=8M
6+1 records in
6+1 records …
-
I note that the FAT command is using the RTC time and date to write files to the FAT32 file system on the SD card or CF card aka media.
This is problematic because modern computers may display the …
-
I like your style (and I may borrow some of your ideas) but I was wondering if you knew that you can automatically link in relocatable object files using **.REQUEST** ?
e.g
```
.REQUEST CONIO…
-
@wwarthen I realised that I can use the CF card module from my RC2014 Z80 system on my SC126 Z180 system.
So I connected both the SD card (SD0) and the CF card (IDE0) and everything worked. By defa…
-
@wwarthen I was noticing that my text files were being corrupted with garbage 0x1A characters at the end of the file after transferring the text file from CP/M to FAT32.
I ran the following experim…