-
If someone is interested in decoding signal from one of my T/RH sensors working on 433.92.
There is a 6 data-packets recorded with RTL-SDR v4 in URH software. Each data-packet contains sensor ID (it …
-
I'm trying to publish to my mosquitto server with a Let's Encrypt signed cert. I have tried almost everything, but always get "MQTT: MQTT connect error: Unknown error -1".
`./rtl_433 -C si -M leve…
-
I'm running a HackRF and an RTLSDR side by side with two different antennas. RTL_433 is running on both simultaneously and says it picks up both devices, but I can't get any readings out of the HackRF…
-
The Acurite-5n1 usually sends interleaved messages of type 49 & 56. When running 22.11 or latest master, only message_type 56 is present. When reverting to 21.12 both messages come in.
Reproducible…
-
For various reasons rtl_433 may output messages with bad data, such as humidity values that fall outside of the range of 0 - 100. For most protocols message integrity checks (MIC) based on checksums, …
-
### The problem
I am getting erros for every single ThremoPro temp/humidity sensors:
`Config for device trigger Thermopro-TX2-9-3-74 Thermopro-TX2-9-3-74-BTN conflicts with existing device trigger…
-
hello, i got an error while uploading FSK_Sample to my ESP32 board. the error says like this:
```sh
Found 31 compatible libraries
Scanning dependencies...
Dependency Graph
|-- 1.0.3+sha.d13cd8…
-
### Current Situation
With the original rtl_433 version and an SDR stick I can retrieve the BRESSER 7-in-1 weather station with the following command: rtl_433 -f 868.2M -s 1000k -X 'n=Bresser-7in1,m=…
-
I see that RTL supports a Cardin S466-TX2. I know it's a different protocol than the Cardin s500. I try to read the signal so I can send it out and integrate it with MQTT, but I do not get any signal …
-
Hello,
Thanks for the image. The following error occurs when I run `sudo docker run va7eex/rtl433:latest-mqtt` :
rtl_433 version 19.08-145-g81ce034 branch master at 202001170105 inputs file rtl…
ghost updated
4 years ago