-
dbrgn updated
5 years ago
-
Having sucessfully flashed some Teckin SP23s I bought a 4-pack of Teckin SP27s from Amazon.co.uk only to find that I can't flash them with tuya-convert :-(
I then found issue #364 (wish I'd spotted…
-
Cannot flash Gosund SP1.
Don't know the firmware version.
The connection to vtrust-flash network only works when I first cancel with CTRL+C and start the script again.
After that I can connect but …
-
Hello,
after a runtime longer then 1 day (now 1day 20h) I can not connect from any device at the same subnet. Connect from router is possible. I scan ARP packets with tcpdump. But the esp-device give…
-
### Description
- Type: Question/Enhancement
- Related issue: #4438
-----------------------------------------------------------------
## Question
I am excited to see Ameba support official…
-
Extend Tasmota with support for SM2135 five channel intelligent dimmer led with constant current driver interfaced using I2C as used in Action LSC Smart Leds (https://www.action.com/nl-nl/p/lsc-smart-…
-
README states
> Most RTL8710 based development boards include a CMSIS-DAP interface for device flashing and debugging, so proper driver installation might be needed.
Link to page with download …
-
We have two target MCUs which share a DAPLink version (say platform A and platform B). They do not share the same target in Mbed OS.
Platform B inherits from platform A and can be programmed with t…
-
I am now attempting to flash a Teckin SP10. The log seems to indicate that this does not use the ESP82XX, but having torn one apart, I can assure you that it does. I'm not aware of the current firmwar…
-
Hi All,
I am pretty new to coding under Arduino, I have another project which is coded up using Vanilla C, and am in the process of porting across to Arduino/esp32
My esp32 is setup as a SoftAP …