-
I've made a few additional packages for satip-axe. Copy them under /mnt/data/satip-axe/packages/ and reboot the box.
Packages:
1. htop
[htop.tar.gz](https://github.com/perexg/satip-axe/files/327…
-
At the "Data Engineering Big Ideas" meeting on 5th March 2024, we discussed that `nowcasting_datamodel` has "tendrils" that reach deep into many of OCF's repos. It would be good to consider how to dec…
-
While trying to the 'SAT>IP client', the error of 'No vtuners found' is presented.
Upon investigation it resulted in /proc/misc/vtunerX device mappings are missing.
Suggesting that currently there i…
-
Hi,
Kindly how I can build ipk for enigma2 please ?
-
DIGIBIT R1
WHEN booting stock firmware no network (and device gets in a loop)
WHEN booting with usb and idl4k.recovery device boots stock firmware OK
When booting with USB and using satip.exe.f…
-
I have following setup:
1- Dreambox 500
2- Flashed image dm500-satip-2.0.img
3- Got IP + Signal
4- untick the "Full Mux Rx mode supported" checkbox if it's ticked, in the SAT>IP server entry. (DONE)
…
-
Hi @catalinii ,
I found another trouble with the SAT>IP client mode: When some SAT>IP client request a `pids=none` for one stream, then the `satipc` module never closes the remote session when the …
-
```
make -C apps/busybox-1.26.2 CROSS_COMPILE=/opt/STM/STLinux-2.4/devkit/sh4/bin/sh4-linux-
make[1]: Entering directory '/root/satip-axe/apps/busybox-1.26.2'
SPLIT include/autoconf.h -> includ…
-
Hello,
is there any support in satip-axe for HLS iptv streaming using a m3u playlist file?
In case I want to link this directly to a client instead of using tvheadend.
-
PRE-ALPHA **satip-axe-201910081157-16** : http://s000.tinyupload.com/?file_id=55622426912282482797
- remove very old minisatip and minisatip5
- update minisatip to 1.0.2
- it's controlled using…