-
I am just starting to try and use a NooElec usb receiver as an SDR which is later going to be used to collect data from as small radio telescope.
On running the test.py file I get the error:
"Error…
-
Hello,
first of all many thanks for investing time in decoding DVB-T2 with an SDR receiver.
I would really like to test it out with my SDRPlay device. I am trying to compile the project for Wind…
-
Hello,
In order to make a practical transceiver using RTL-SDR as the receiver it would be very much useful to have one GPIO line acting as a PTT, in this way you can control a relay or other conmuta…
-
Hi everyone. My name is Petros, and I am learning at NPUA (in Armenia).
I have been working on GPS spoofing using HackRF for over 6 months, specifically focusing on GPS spoofing with noise and withou…
-
With HackRF, Audio, etc. support for devices that can transmit through SoapySDR it's now possible to create the framework for transmitting analog or digital signals.
Ideas for transmission support:
-…
-
1. Thank you very much for that sofware! :-)
I am trying to get some ADS-B samples from an remote station
IP: 94.208.173.143
Port: 5555
But I am always getting an error:
`./ss_client iq -r …
-
I am opening this issue to report a mismatch between the documentation and the actual functionality of the receiver.
The [documentation](https://gnss-sdr.org/docs/sp-blocks/global-parameters/#telec…
-
### Description of the setup:
* Device: None yet
* SD card image: None yet
* Application: GHz VNA receiver
* Other relevant information:
### Description of the problem:
I'm looking int…
-
Hi,
i tried the newest ubuntu 18.0x to install the gnss sdr
but it failed that it need many dependence lib;
then i tried the 16.04 version to install the gnss sdr;
but it failed wh…
-
When scanning control channels at start or anytime if the control channel scanning crosses between SDR receivers the control channel will never lock on. This is across both trunking types P25 & SmartN…