-
Subject of this task is to make working communication in both ways between cue app and raspberry pi pico.
- [x] auto find connected pico by description "pico"
- [x] make function for sending comma…
-
Currently, serial communication between the Teensy boards is very slow (~8 Hz), likely due to the size of each packet.
Packets are encoded as strings, where each character in the string is a byte.
…
-
I have programmed my Arduino Nano board with the challenge binary and found out the baud rate using Logic analyzer. I tried connecting to the target from windows as well as linux machines and was able…
-
Communication goes silent between concord4ha and concord4ws if the box that the ws docker is running on is rebooted (on purpose or otherwise).
Communication restarts (resumes?) if I:
```
su…
-
The serial communication between Mac and Arduino is currently not working for me.
-
I'm unable to get serial communication going on the 841.
I have the 841 OptiBoot bootloader on it at 8mhz with B.O.D. disabled, LTO enabled.
Based on Spence Konde's pinout, I have this arrangeme…
-
Which serial communication is used and in in which pins if it's software serial
-
I'm trying to create a program that translates communication over a non-BACnet serial communication bus (similar to Modbus/485) to a simulated BACnet device or simulated BACnet virtual lan.
The sam…
-
Design and implement communication protocol for handling serial/USB communication.
MCU higher level controller
Requirements:
- timestamps (in microseconds)
- handle IMU with encoders data
-…
-
I wanted to test RAM, Kingston DDR4 2*8GB on a Clevo NV41MZ Laptop,
Processors: 8 × 11th Gen Intel® Core™ i7-1165G7 @ 2.80GHz
```
lspci
00:00.0 Host bridge: Intel Corporation 11th Gen Core Pro…