-
I'm using something written using the Example 2 of this page:
https://github.com/openhab/openhab/wiki/AlarmClock
This means I have something similar to this in my sitemap:
Frame label="Ze…
-
Hello, I am using both the scheduler component and the scheduler card with a Tado heating system.
I have it setup as per the screenshots below
It is supposed to set the heating to 21C twice a day…
-
Hello,
Is there correct way of controlling gas boiler via this smart thermostat?
I connect to boiler via OpenTherm protocol and it is possible only to set temperature setpoint for the supply from …
-
I get this error every time I click something from the Outfitter menu. Thank you
Message: ...tter/Libraries/MC2UIElementsLib/MC2UIElementsLib.lua:1422: Action[SetPoint] failed because[SetPoint woul…
-
For some reason the range of temperatures on the "Cool Setpoint" never goes below 73 degrees F. This doesn't correspond with the temperature range I've got set up on my ecobee thermostat. What contr…
-
### What happened?
I have an Acova Taffetas2 heater Zigbee Model TAFFETAS2 D1.00P1.01Z1.00
It appears as supported in Zigbee2MQTT and exposes three system modes: "off", "auto" and "heat".
Bu…
-
### The problem
### Problem 1:
I am unable to do this via the UI:
> Please set the Setpoint of the emulated Thermostat Setpoint device to '22 °C' for the 'Cooling' Setpoint Type
![grafik](http…
-
**Application Version**
Cura 3.2 / 3.1
**Platform**
Ubuntu 16.04
I am using Cura AppImage. My printer is a printrBot simple metal.
The reported extruder is 0°C and the setpoint is also 0°C...…
-
### What happened?
When resetting Window Detection to "off" after longer periods (~30 Min) of window open, the thermostat will stay at target temperature (Occupied heating setpoint) 8°C, instead of…
-
Short traceback:
```
In [1]: from ophyd_async.core import save_device
In [2]: RE(save_device(panda1, "test.yml"))
An exception has occurred, use '%tb verbose' to see the full traceback.
TypeE…