-
I'm facing an issue in mounting usb formatted in ntfs. Kernel 4.13 in antergos with gnome.
-
Can't seem to get it to finish creating the necessary nodes.
Running Lineage 18.1 as of yesterday. Samsung A5 (2017)
[*] ConfigFS seems to be mounted...
[*] ...and usb_gadget is available
[!] us…
-
I was building this for my SteamDeck and noticed that during compiling, it was building things like drivers for Wifi Chipsets the Steamdeck doesn't have, as well as things like Nouveau.
Would it ma…
-
Following is the list of files changed as detected on 2017.05.20
Please review the file changes and close the issue.
-
Error i2cRead returned Error 263 using SHT21 with ESP32 in Home Assistant using ESPhome. I wanted to try this library.
-
- [x] Create manifest (https://github.com/Halium/halium-devices/pull/35)
- [x] Boot image and system image build successfully
- [x] Device boots into rootfs, `usb: Manufacturer: GNU/Linux Device` ap…
-
### 详细叙述
X86 J4125四口主机,看到最近加入了r8157 5G USB有线网卡支持,迫不及待买来测试。
![image](https://github.com/user-attachments/assets/2751c43a-cbcf-4137-885e-896fded75f28)
可以正常识别,显示为第五个网口eth4,并加入LAN。刚插入网线的前几秒可以用,但10秒左右就会…
-
### Describe the bug
Building for BCM2711 (Raspberry Pi 4). I get the following error although v3-utils is not enabled in make menuconfig:
./../../../build_dir/target-aarch64_cortex-a72_musl/v4l-uti…
-
As discussed on ##linux-surface, hardware buttons on some Surfaces are not working. Reloading the button module works post-boot:
```
sudo modprobe -r soc_button_array
sudo modprobe soc_button_array…
-
### The problem
SHT21 sensor (gy-21) don't work with esphome. That sensor work korrectly on sane board with arduino library.
### Which version of ESPHome has the issue?
2022.8.0
### What t…