-
I am seeing warnings when building the docs:
```
cd doc
make html
...
WARNING: autodoc: failed to import module 'eaton' from module 'labgrid.driver.power'; the following exception was raised:
…
sjg20 updated
6 months ago
-
**Describe the bug**
SmuView can't connect to either my DMM (Brymen BM869s, connected via BM-86X), nor my PSU (RND 320-KA3005P, connected via USB). Both are detected by sigrok-cli (0.8.0-git-525f481)…
-
Siglent has SCPI queries (e.g. SCDP) not ending with a question mark (?)...
The SCPI component doesn't accept this. It thinks this is an error:
, the capture fails.
for example when i select only one channe…
-
Hello,
I have SKR3 EZ board with old TMC2209 drivers that should be compatible. However, I am getting:
```
Driver registers: …
-
I can open a resource (RIGOL DM3058E, digital multimeter) using USB but I'm unable to get it's IDN.
The code:
import visa
rm = visa.ResourceManager("@py")
print(rm.list_resources())
inst = rm.open_…
-
## Setup
- Arch Linux
- scopehal-apps (45d255de8795bf5cf62054145907fcb5a022a104)
- SDS2004X Plus connected via lan and lxi
- Hardware revision: 05-05
- Tested versions:
- v1.5.…
-
I have been doing some experimenting with my heat pump. I found if you send a request packet (0x42) with a 0x09 in byte 5 (0xfc is 0) you get a packet with a few info bytes. Here is what I found so …
-
In the past I was able to get python to derive a lot of information about the connected device (such as Manufacturer ID), but now pyvisa-py fails to identify anything about the device other than the b…