-
Greetings, I recently bought a lilygo T-SIM7600G-H 16MB card and I have been experimenting with it, but on many occasions a problem happens to me when I initialize the sim7600 and if I go through that…
-
Hi,
Is it possible that when battery voltage drops below 3.7v the SIM7000g modem cannot connect to network?
In other posts I have seen lowest voltage around 2.7v.
How do you overcome this issue? I d…
-
We're using a Li-Ion rechargeable battery to power T-PCIE + SIM7600E modem. It's working fine as long as the battery it's over 3.7-3.8 V, but under, the board shutdown. Unfortunately that means I can …
-
Hi,
I read here: https://github.com/Xinyuan-LilyGO/LilyGO-T-SIM7000G/issues/3#issuecomment-645846015 that power consumption in sleep mode is about 300uA
I am trying to reproduce this with sample c…
-
Hello
Is it possible to charge the internal battery not through the USB input
because when there is a power fail and there is no voltage to charge it,
the modem reboots or when the power returns.…
-
#56 # What are you working with?
Modem: SIM7070G
Main processor board: ESP32
TinyGSM version: (0.10.8)
Here is the code, I just changes the APN to iot.1nce.net in the code. The rest is the s…
-
[ ] Bug or issue with library functionality (ie, sending data over TCP/IP)
Modem: SIM7000G
Main processor board: ESP32
TinyGSM version: latest (0.11.4)
Code:
No need for code. When subscri…
-
I have had 3 boards die ( technically 4 but that was my bad, connected battery backward and poof it dead )
I am using an external battery back 3s3p 18650s that output ~11.1v, this is inputted into a…
-
**Describe the problem you have/What new integration you would like**
I'd like to add a mobile data connection to my ESPHome. For example:
* M5Stack COM.NB-IoT Modul SIM7020G
* M5Stack CO…
tobru updated
9 months ago
-
Firmware: https://github.com/Xinyuan-LilyGO/LilyGO-T-SIM7000G/blob/master/frimware/Arduino_NetworkTest_Frimware.bin
How do I get it to work?