-
Hi,
What is the PWRKEY pin ? 7080G pinout tells GPIO41 for PWR, is it correct one?
I expect to set the PSM mode and wake up the modem by pulling LOW from HIGH, but I read the status of that PIN…
-
### Answers checklist.
- [X] I have read the documentation for esp-protocols [components](https://github.com/espressif/esp-protocols#readme) and the issue is not addressed there.
- [X] I have updated…
-
Hi,
I found ModemMqttPulishExample the snprintf format below was not aligned with the parameters definition of SMPUB in SIMCOM MQTT application documentation, username, clientID and data_channel ar…
-
Hi, do you have examples to access AWS MQTT through the RootCA, device cert and private key ?
-
### Answers checklist.
- [X] I have read the documentation for [esp-protocols components](https://espressif.github.io/esp-protocols/) and the issue is not addressed there.
- [X] I have updated my esp…
-
I'm testing the LilyGo-T-SIM7080 for deep_sleep mode and it seems that there is an issue.
I'm using a simple loop
void loop()
{
esp_sleep_enable_timer_wakeup(5 * ONESEC_USECS);
LOG_M…
-
Hi, I saw there 4 of BLE5 example codes there, I am considering to connect SIM7080G module through the Bluetooth connectivity as console port to upload my compiled image, and monitor the printout info…
-
Hi,
I found an I2C conflict between PMU and I2C sensor. If I give Wire.begin(sda,scl) for MPU6050 sensor ahead of PMU.begin(Wire, AXP2101_SLAVE_ADDRESS, I2C_SDA, I2C_SCL), it reported PMU failed …
-
Hi, do you have the example code (platformio) to turn on BLE 5.0 on this module?
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…