-
Hi, i am currently working with your library and i would like to implement it with HW serial2 on a Mega.
Are you working for developing it?
Thanks
P.
-
Using Raspberry with sim900
```
sudo node node_modules/simcom/example/read_sms
/home/pi/node_lab/gsm_sandbox/gsm2_simcom/node_modules/simcom/node_modules/q/q.js:155
throw e;
…
-
Could you please add information in the readme what the difference is between all the different GPRS libraries developed by Seeed Studio?
I have found these X different implementations:
https://githu…
-
Hi, I got this board
https://es.aliexpress.com/item/33045221960.html
Which is the equivalent schematic? I'm not sure.. it is https://github.com/Xinyuan-LilyGO/LilyGo-T-Call-SIM800/blob/master/sc…
-
Add a button on the lock screen that allows someone to initiate an emergency call (but only from a preset list of numbers like 911, 112, etc.)
I think the SIM800 has AT commands related to emergency …
-
01-01 00:00:00 E/at.clnt at_clnt: AT Client receive failed, uart device get data error(-2)
01-01 00:00:00 E/at.skt.sim800 at_clnt: sim0 device receive size(2) data failed.
01-01 00:00:00 E/mqtt mqtt…
-
**Is your feature request related to a problem? Please describe.**
For my information, library ESPAsyncWebServer work via Wi-Fi.
In my controller, communication is carried out either via wi-fi or …
-
I have V1.4 of lilygo with ip5306; when I shift the load by just unplugging the USB, the gsm gets turned off, and I either have to restart the whole board or manually turn off the gsm. What can be the…
-
Hi,
I would like to use GSM (GPRS) network in my project.
Plain unencrypted HTTP/MQTT is not problem, but I want to use SSL.
I found some examples of HTTPS with SIM800, but no MQTTS.
Is poss…
-
Detection of DTMF tones - SIM800L module.
I get "OK" when I send 'AT+DDET=1,1000,1,1* ' over uart .
But it doesnt seem to detect anything afterwards.
Perhaps I am doing something wrong.
Would ap…