-
Hi,
Just checking: does simavr handle the USI overflow interrupt on ATtiny85? My code below never blinks...
thanks!
```
#include
#include
#define F_CPU 8000000
#include "avr_mcu_secti…
-
Test one:
```
#include
unsigned char myvar = 0xab;
void main(void)
{
PORTB = myvar;
}
```
Compile and run it in simavr:
```
avr-gcc -g -mmcu=atmega168 -DF_CPU=16000000UL -c…
-
hi, all,
![1530785153 1](https://user-images.githubusercontent.com/17917531/42317119-20053fe4-807e-11e8-9cc1-b67da1c1d1d3.png)
as you can see, i had connected succeed to the simavr, but when I …
-
https://github.com/Pauan/nulan
https://github.com/rswier/c4
https://github.com/brownplt/pyret-lang
https://github.com/mndrix/golog
https://github.com/aichaos/rivescript-go
https://github.com/…
-
Question: Is there a simple way for serial input?
I fiddled around with your amazing simavr a bit and learnt that you could see the serial output of a simulation:
```
~/compile/simavr/simavr/run_avr…
aanno updated
7 years ago
-
Hi,
the situation. A port has some pins assigned as outputs, and some as inputs. Inputs have their associated pin-change interrupts enabled. So when setting just a single output pin with
```asm
C…
-
By default, simavr wouldn't build on my laptop. I've got [CrossPack-AVR](http://www.obdev.at/products/crosspack/index.html) providing my avr toolchain, and libelf etc. installed from homebrew (into /u…
-
Hello,
I'm trying to work with getting python code to write strings over the Serial link over time.
I've set up a loop that looks like this:
```
while True:
avr.run()
r, w, x = sel…
-
As I was struggling with input capture and reading the timer value, I slowly removed all unnecessary code to reach the following example of what I believe to be improper behavior of the timer overflow…
-
First of all, much thank you from Miyoo's community for adding support on these devices (which was unexpected thing!).
Arduous core properly emulates *.hex files on my handheld (Powkiddy V90), albei…