-
As far as I understood the [zendure-satellite-plug](https://zendure.de/products/zendure-satellite-plug) allows telling the SolarFlow how much power it should put out to the inverter, right?
Thought…
-
Hello,
I also want to read the data from the p1 port.
The cable to the smartmeter works under windows, but on the raspberry pi the data on the therminal isn't readable.
`pi@raspberrypi:~ $ sudo cat …
-
More a question or a suggestion for optimization - not an issue.
Both, RFLink adapter and SmartMeter adapter are using USB, serial COM inputs.
The input unit of the smart meter adapter seems to be …
-
There are new endpoints with Solarbank 2 / Smartmeter / Smart plugs support that needs to be explored for capability and usability:
```
print(json.dumps((await myapi.request("post", "power_service…
-
**Describe the bug**
OBIS String 1-1:30D, 1-1:7D, 1-1:1D are ignored by the adapter.
**To Reproduce**
Steps to reproduce the behavior:
1. Have an Elster AS1440 (in my case I have two, one fo…
-
Hello,
since upgrading Node Red, I have an issue with Smartmeter. After uninstall is no new installation possible. As I understand, there is an issue with the version of Python. But I cannot resolve …
-
eventuell ein Problem mit VenusOS 3.0 ?
Shelly wird erkannt uns ausgelesen
aber Energy Meters ist leer:
und ESS steuert deswegen nicht.
-
If I run the script manually via service/run there isn't any problem (see attached picture).
If it runs automatically after reboot it works for around 10 minutes and the values will not update anymor…
-
I'm trying out Smartmeter. I have a SlimmeLezer+ flashed with ESP-link connected to my Landis Gyr E360 LTE, using the following config in Smartmeter. The Landis Gyr sends data every 10s.
![image](htt…
-
### PROBLEM DESCRIPTION
_A clear and concise description of what the problem is._
### REQUESTED INFORMATION
_Make sure your have performed every step and checked the applicable boxes before…