-
2x Supervolt SX150P
- address: C4:08:7D:7F:B8:1C
type: supervolt
alias: Vorne1
- address: E6:F9:20:27:3C:31
type: supervolt
alias: Hinten2
Error:
ERROR [supervolt] (, BleakError('…
-
### Is your feature request related to a problem? Please describe.
There are a couple of devices (power meter, battery charger, bus) which requires serial interfaces. Each device has to be configured…
-
### Describe the problem
Cannot select bms as battery monitor.
![IMG_5328](https://github.com/Louisvdw/dbus-serialbattery/assets/32992135/3adf84db-4f87-4672-a46d-6711f2aec721)
![IMG_5329](https…
-
v3.0.63
Three Banks 24V300Ah/JK-BMSes parallel
Hardware: Cerbo/RPi??? Rpi 4
Setup: DVCC? yes
I want to exclude the Smartshunt becaue the Current in Batteryaggregator is twice of the Shunt …
-
Hi, ich versuche pin_mapping für Fusion Board mit einem SDM-Zähler über RS485 + JK-BMS + 1x Victron einzurichten.
Ich bin total verwirrt was die Pinbeschreibung angeht.
Da steht
https://github.co…
-
### Is your feature request related to a problem? Please describe.
_No response_
### Describe the solution you'd like
Im using 2 x 12V LifePo4 batteries in series - and i want to know, if they drif…
-
[...]
But for now my Console seems to be unreadable, because of the amount of logs produced by the VE-Direct without verbose logging.
```
[VE.Direct MPPT 14/-1] Unknown text data 'IL' (value '0')…
-
With the beta of this month the integration stopped working it is not connecting to the device anymore. When I restore the backup of the last version it works again.
The device is the Victron Smart…
-
### Is your feature request related to a problem? Please describe.
Besides the Huawei charger it would great to also support Victron AC chargers. This the Phoenix line of AC chargers (expensive), whi…
-
Trivial change and on a CCGX this saves 6 to 7% + another 6% for dbus-parallelbms of CPU. [See screenshot, make sure to look at the v3.40 one](https://github.com/victronenergy/venus/issues/1317#issuec…