-
I am new in Arduino. Below are the steps I have performed.
1. Uploaded grbl header in Arduino.
2. attached CNC shield with Arduino.
3. Using DRV8825 as stepper driver for NEMA17 steppermtors. Vre…
-
It appears that the original SMPS drivers were binary blobs. Doing the same for this driver should help with compatibility, and ease-of-use. Then again, only one disasm primarily uses asm68k, and the …
-
### Description of the setup:
* Device: Stemlab 122.88-16, V1R1
* SD card image: red-pitaya-alpine-3.14-armv7-20220322.zip
* Application: "SDR transceiver compatible with HPSDR"
* Other …
-
### Describe the feature
Add illegals to notifier. So when someone is holding a 32k (or 255 for 1.17) it notifies you
-
As most of you know the I2C0 bus is 'owned' by the firmware and it's encouraged not to use it. If we had a firmware interface to the I2C0 bus, that took care internally of managing firmware and OS req…
-
## Overview
I am testing Crunchy Postgres database backup on Openshift, and I found there are 2 results I do not understand.
(1) Multiple backup Pods were started and some Pods failed quickly.
(2…
-
Open issues :-
- [x] How many Ardunio Mega does it actually use? How many pins are left to use for other purposes?
- [x] How to power RAMP circuit?
- [x] Can we use unregulated power source? If …
-
1.0
[general.zip](https://github.com/kuj0210/Smart-mobile/files/2041547/general.zip)
1.1
[General.zip](https://github.com/kuj0210/Smart-mobile/files/2041750/General.zip)
![image](https://use…
-
Hello
I have some issues with building this nice device.all parts were used from the bom list except RGT16BM65DT i used instead IKD06N60RATMA1.
Gerber files used were rev04_normal.zip also with …
-
We should get everything into a top-level namespace, `lbda` or `smips` or similar.