-
## Description
Support for dual extruder control in workspace
- Idle
- Printing
, the original A350 was rated at 250c Max, and the start gcode picks the
max of (250 or min(29…
tyeth updated
6 months ago
-
Im having trouble with opening certain dxf files on Luban.
By that I mean some files just cannot be opened, it just says "Loading object 12.5%" with no end. It's hard to say what causes it, perhap…
-
Following @ITmaze [suggestion](https://github.com/clsergent/Snapmaker2Postprocessor/issues/3#issuecomment-1397758118), I open this discussion. Per his own [words](https://github.com/clsergent/Snapmake…
-
The issue is caused by at least the version 4.8.0 and 4.8.1
Only used those two versions
Steps to reproduce the behavior:
1. Go to 4 axes CNC
2. Use default setting on an stl file that needs inn…
-
### Description of the bug
I open the attached project.
Slice... and then add the following G-Code `M104 S245` at layer 71.
When clicking on "Ok", the project "resets", the custom G-Code is gone...…
-
Below is pasted verbatim from my forum post. Sorry if double posting isn't useful but unsure which is a better feedback location. Here's the post:
https://forum.snapmaker.com/t/fusion-360-cnc-confi…
-
All drivers and programs are updated to latest versions.
Generating gcode through Fusion360 using "Wrap Toolpath" leads to B rotation that is out of line with the rest of the gcode when the origin…
-
I will do several tests attempting to send the same file with settings slightly adjusted. Right now, when sending the files via WiFi, the time stamp is a different UTC than where I am. This can be fru…
-
When using the dual extrusion print head, the firmware makes the assumption that the bed is beloz 50mm
https://github.com/Snapmaker/Snapmaker2-Controller/blob/3150c90a17f5eccc3f1c078a7d13439d6a5e9…