-
I found this project while googling for CNC upgrades and I'm fairly enthusiasic about it! Awesome work @bdring !
However, it seems the only readily available boards are the ones on Tindie from Bart h…
-
Base plate pin holes need to be drilled out to 0.063 in for ease of assembly, or the 0.059 and the pins pressed in with a soldering iron. Pinout needs to be documented. Alignment pins need to be sho…
-
For example, if you "do something" in a room (like use the soldering iron in Schmalz Haus) then remember that so that if you come back to that room your options are different.
So, how to create glo…
-
I have successfully updated the firmware, but when the soldering iron reaches the desired temperature it goes into standby mode (and thus cools down again)
This happens every time I try to go into…
-
It would be nice to have an option to do the cross-connecting described here:
http://a1bert.kapsi.fi/Dev/burst/
As a menu option, vs having to take a soldering iron to my Ultimate64. For those of …
-
It would be nice if the soldering iron recognizes the connected lipo and automatically sets the correct cut-off voltage. So that you do not have to manually specify the used Lipo 3S, 4S, 5S, 6S.
Th…
-
Howdy,
Stumbled on this looking into getting a keyboard that is ergo to me etc. Fell into the rabbit hole of the wonderous world of custom keyboards, anyways enough of my life story - just know I…
-
Things to pack:
- soldering iron/s
- wire cutters
- desoldering pump
- solder wire
- solder wick
- build instructions (10 each)
- boards and panels (10 each)
- components incl jacks, switches, pots, k…
-
Hi, Sparkfun ( or Lady Ada ? ) has some extra long footprints oin their Eagle libraries for some surface mount components that make them easier to solder by hand.
Here are the components I struggled…
-
Are you tired of using a breadboard for your projects? Do you find it exhausting to deal with all the wires, constantly struggling to remember which one goes where on the breadboard? 😕 Well, look no f…