-
**Description:**
FDB Entries are not cleared even after shutting down the respective interface on this the entry learned.
**Procedure:**
1) Created a VLAN using below commands
config vlan add …
-
#### Description
Hello everyone. After tackling the Device ID problem in my previous issue (many thanks to all who contributed) (https://github.com/sonic-net/sonic-buildimage/issues/19328),…
-
**Description**
During vnet vxlan test, the test applies the number of routes given as an argument, in this case, this is the default value of 16K.
Though, after applying the routes with swsscon…
-
#### Description
exception in `show interface count` or `portstats`
```
$ sudo ip netns exec asic2 portstat | grep -E 'IFACE|Ethernet256|Ethernet264'
Traceback (most recent call last):…
-
Salutations!
We are attempting to run SoNIC on a Mellanox SN2700 switch. Several of the docker services fail to start. With my limited troubleshooting ability, I believe I have discerned that the H…
-
Got everything installed and working but I can't get my nebula camera to work. I have tried everything I can think of to make it work. It shows that it is connected, and it sees the camera but can't g…
-
#### Description
When ZTP is disabled, it stops the services. However if this happens during hostcfg initialization phase, hostcfgd will throw errors like below due to conflicting systemctl…
-
**Description**
The route_check is not ready for the IPv4/v6 default routes created by RouteOrch in ASIC_DB only. As a result it always throws errors making many tests failing due to log analyzer.
…
-
#### Description
Attempting to create a VM using `virsh` per https://github.com/Azure/sonic-buildimage/blob/master/platform/vs/README.vsvm.md fails. I am using an Ubuntu 16.04 VM inside VirtualBox …
-
#### Description
I did NOT setup any ACL/ACE. But every VLAN can communicate with each other plus Ethernet0; except for one, in my case Vlan53. It was working 3 days ago, and then just stopped.
…