-
### Problem description
Currently only opening and closing the valve is possible however the Sonoff hub and Zigbee2MQTT support pulling in if there is an issue with the valve and the flow data from t…
-
I managed to correctly log in, but the list of devices is empty.
This is what I'm doing:
```python
import sonoff
s = sonoff.Sonoff("email@example.com", "mypassword", "eu")
devices = s.get_devic…
-
### What happened?
False 255 LQI using Multipan Addon - Devices are ok but the LQI showing 255 for all devices near or far from coordinator.
### What did you expect to happen?
Expecting to se…
-
### Problem description
The device in question doesn't report any information
the device:
https://www.aliexpress.com/item/1005006861229185.html?spm=a2g0o.order_list.order_list_main.40.faef1802VfX…
-
Hi, it is possible to control sonoff devices over a local network. There is no need to flash devices for this (need original firmware over 3.0). Open source Home assistant adapter available at this li…
-
### Problem description
I have a TS0207 battery powered outdoor rain and light intensity sensor:
https://a.aliexpress.com/_EjJGdz9
The sensors are reported as a motion and open/close sensor. It s…
-
### Problem description
The device is discovered, but with no sensors. I have all connected fine, I can see total and instantaneous power in Tuya app. Where to start?
### Solution description
…
-
### Problem description
This button is registered as an IAS Device. It will never turn off once activated, so it needs to be removed an re-added every time it is used.
### Solution description
Cust…
-
As the subject says, TDM show neither power state nor power switching option for Sonoff S26. The devices uses the template for Sonoff S20.
Latest TDM is used together with ```mosquitto 1.6.8``` on …
-
### Problem description
Device paired but no entities
### Solution description
Please create a custom quirks
### Screenshots/Video
Screenshots/Video
[Paste/upload your media here]
…