-
Seems to be a recurring issue with this driver. I'm sorry if this has been covered before. I'm an amateur when it comes to embedded and it's my first time doing it.
I have a Pi Pico with a Pimoroni…
-
(Explain how this peripheral could potentially be used in the car)
- [ ] Propose an interface of functions (Do a quick design review w/ other firmware/application engineers)
- [ ] Implement functi…
-
## Overview
Read GRAM with ILI9488 in SPI mode
## Details
Review hal.cpp for correct pin definitions with ESP32S3 SPI (SD, TFT & Touch)
-
Hi I'm trying to expand on the uConsole by leveraging the SPI and i2c busses, however they all seem to be disabled, even after trying to turn them on through the raspberry pi config.
-
I've been trying to get SPI to work (with DMA) on this device using your bare metal code. I've imported the HAL declarations and implementations for SPI but I cannot figure out the clocks, the divider…
-
Apollo3 Blue MCU is not able to communicate with SX1262 transceiver over spi. For test purposes, I used sample/subsys/lorawan/class_a example project.
The code is running on RAK11720 module from RA…
-
We are developing a program to utilize the front-panel GPIO pins of USRP X410 for SPI applications. The examples written in C++ proved useful for most purposes. However, we would like to carry the SPI…
-
`python make.py esp32 clean submodules mpy_cross BOARD=ESP32_GENERIC DISPLAY=ili9341 INDEV=xpt2046`
```
/Users/tbe/esp/lvgl_micropython/lib/micropython/ports/esp32/machine_hw_spi.c: In function '…
-
One possible solution to protect flash and distinguish between what app can reach a certain part of the flash, is to only allow fw to access the SPI flash. In that way the app may use functions throug…
-
Here is the linux side log
34.813006] esp32_spi: loading out-of-tree module taints kernel.
[ 35.038599] esp32_spi: spi_dev_init: ESP32 peripheral is registered to SPI bus [1],chip select [0], …