-
Hello, thanks for sharing your code here.
I'm want to do the exact same thing, i.e. reading the car SoC using an ESP32-S3 using the QCA7005.
However, I was wondering how you connected the QCA with t…
-
### Boards
Datalogger Iot board(AMB26)
### External Hardware
none
### Hardware Configuration
none
### Version
latest dev (checkout manually)
### IDE Name
Arduino IDE 2.3.2
### Operating Syst…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…
-
Hello!
I have 2x N8R2. After flash YD-ESP32-S3-N8R2-MPY-V1.1.bin
```
[22:41:37]ESP-ROM:esp32s3-20210327
[22:41:37]Build:Mar 27 2021
[22:41:37]rst:0x1 (POWERON),boot:0x8 (SPI_FAST_FLASH_BOOT)
…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have up…
-
I have an ST7789 module that works fine until version 2.5.34, but after 2.5.43, the display is blank.
Hardware configuration including pin configuration is the same, I modified User_Setup_select.h an…
-
I'm not able to power SPI with 1.8V in way that I can further proceed with SPI operations:
```
SPI> W
Power supply
Volts (0.80V-5.00V)
x to exit (3.30) > 1.8
Maximum current (0mA-500mA), for no…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…
-
[Tests of users](https://forum.openwrt.org/t/belkin-rt3200-linksys-e8450-wifi-ax-discussion/94302/5525?u=daniel) suggest that correctable bit-flips in SPI-NAND connected via SNFI on MT7622 do *not* ge…
-
I have custom board with xilinx xc6slx25ft256 + AT45DB161E. Impact can detect & flash it. But can't flash with openFPGALoader. Already generate spiOverJtag for xc6slx25ft256 and succesfull on QMTECH b…