-
Hello
Model Escam PVR008
Board S834-A0-B
Sensor JX-F23
CPU Hi3518ERNCV300
Network Realtk 8188ETV (M8188FU3)
https://github.com/OpenIPC/openipc-2.1/issues/40
commit 09d1720331967b5a8db28c73f…
-
Hello,
I flashed the latest openipc-hi3518ev200-lite-8mb.bin and get a bootloop on startup.
Unfortunately, no error message is displayed.
Something looks wrong when booting kernel at the en…
-
想用K2P试试这个功能,不知道这个spi nand芯片能不能成功。PDFN8封装的1gb/2gb芯片不好找,看了看也就这个还行。
-
Hello,
Thanks for your works .
I have a reolink RLN8-410(hardware version:N2MB02 or H3MB18)
It does not start up successfully after powering up
I can putty to nvr,and this below is the output…
-
Dear all,
I use the nRF52840 DK with Segger Studio and a Micron SPI SLC NAND 2Gb (256MB) Flash memory. I have already implemented the basic write read and erase functions for the NAND chip and the…
-
CC cmd/nand.o
CC common/flash.o
cmd/nand.c: 在函数‘do_nand’中:
cmd/nand.c:642:4: 错误:‘nand’未声明(在此函数内第一次使用)
nand->rw_oob = 1;
^
cmd/nand.c:642:4: 附注:每个未声明的标识符在其出现的函数内只报告一次
cmd/n…
-
The board hasn't made it to OpenWRT 23.05 support, only 19.07 at this point, so I figured you got a nice build here with correct feeds and all, so I have a proposal on including my devices in this bui…
-
I found that winbond flash chips supported by flashrom are all nor based. Can I add nand based serial flash chips?
Thanks & Regards
Asmita
-
*rogerpueyo:*
The ath79/mikrotik MikroTik SXT Lite images (initramfs, sysupgrade) are missing the MikroTik Routerboard platform drivers. Therefore, the hard_config and soft_config partitions are not …
-