-
### LVGL version
master
### What happened?
I added Arm2D to [this repo](https://github.com/lvgl/lv_port_renesas_ek-ra8d1) added `arm_2d_cfg.h` and CMSIS-DSP, disabled LTO (to avoid some link time e…
-
Hi!
First of all congratulations for the amazing project and secondly thank you for sharing with us.
I'm facing some issues on which I need your support.
I have a LILYGO® TTGO T-Display ESP32 1.14"…
-
Hi, this is not an issue, it's more a newbie question.
I'm using a X-NUCLEO-GFX01M2 STM display board along with a STM NUCLEO-F411RE board.
Display is a ST7789V (2.2" SPI QVGA TFT LCD 320x240).
It …
N0ury updated
11 months ago
-
### Bug Description
This is `bugfix-2.0.x` commit d84aff701e10a49d5ccc69ce323fdb0fdb84b6db
Long travels exhibit stuttering movement when ABL is configured and enabled.
If I switch ABL off by …
-
Good morning,
I made a mistake and purchased a 4.3inch ESP32-8048S043 screen.
This is a capacitative IPS RGB screen with 800*480 pixels and 8m PSRAm and 16M Flash memory.
It is possible to us…
-
I have two hardware devices:
1. `stm32f401ccu6` + `ILI9486` display(3.5")
2. `esp32` + `st7789` display(2.8")
Both are connected via `8-bit parallel` interfaces.
`stm32f401ccu6` and display is co…
-
When I run the code below, for some reason the screen is completely buggy after using the wifi, it stops responding to drawing commands, and for some reason my esp32 keeps the onboard led blinking non…
-
As [some larges changes](https://github.com/lvgl/lvgl/issues/4011) are added to master we can start to add more drivers into LVGL. As an experiment I've already added SDL, linux/fb, and TFT_eSPI. It s…
-
I was able to suppress the terminal output to a display by commenting the following lines:
`
//supervisor_start_terminal(width, height);
`
within:
- shared-module/displayio/[Display.c](…
-
This comment indicates it only works with SPI mode: https://github.com/almindor/mipidsi/blob/321daa0195968de62ca187fb01305e26dac0b454/src/models/st7789.rs#L21
Is that still the case? I was able to …