-
### Describe the Bug
Hi, I'm trying to flash multiple Nz64 RGB REV 1.0 boards manufactured by Y&R with my custom QMK configuration.
I've tried both compiling and flashing these boards with and wit…
-
## Introduction
Flashing the blackpillv2 with a `blackmagic-blackpillv2.bin` file built locally using commit 32543bb (v1.9.0) leads to a non-functional board. It seems this issue could be specific to…
-
USB appears to fail when the `UsbDeviceBuilder` is called, regardless of what it is used for (serial, hid etc). The device gets stuck at this line and never goes over (does not panic, just gets stuck)…
-
I'm trying to make usb host on the stm32f401ccu6. This error occurs when connecting a usb device. I'm using CubeIDE. My code is copied from the stm32f429igt6 example. I followed the steps according to…
-
Hi, because I don't know how to add pull request I have some questions.
1. Is this library compatible with STM32Duino - Serial1, Serial2 on STM32F4?
2. Addressing of slaves and master are working …
-
## Describe the Bug
I use an touchpad with keyboard so I tried before Interrupt version but nothing works but with BUSYWAIT version I can use the touchpad. I tried USART version but the c…
-
### Operating System
Windows 11
### INFO_UF2.TXT
TinyUF2 Bootloader 0.10.2 - st/cmsis_device_f4 (v2.6.8) st/stm32f4xx_hal_driver (v1.8.0-8-g1d99564) tinyusb (0.12.0-203-ga4cfd1c69)
Model: STM32 ST…
-
I used this touchpad with sparkfun pro micro (clone~caterina) with interrupt mode and works fine.
But now not working with ARM blackpill with interrupt mode (I also tried few pins: https://github.c…
-
I have a tiny f4101cc which ive always used interchangeably with my blackpill the same firmwares unmodified have always worked on both, but in libopencm3 the 401 wont enumerate...It doesnt even try my…
-
The STM32F411 is out of stock on JLCPCB.
Is STM32F401CCU6, STM32F303CBT6, or GD32F303CCT6 (bluepill plus) compatible with C4? or should I use C3?