-
Automatically ask USB-PD supply of it's power capability with the STUSB4500 negotiation chip and limit the output power based on the capability.
There is currently no such check and if you power A…
-
With recent OpenOCD development builds of OpenOCD (such as https://github.com/rleh/openocd-build/releases/tag/0.12.0%2Bdev-snapshot.20230320.2313 or https://github.com/rleh/openocd-build/releases/tag/…
-
For the next generation PCB, we're looking at switching away from the Atmega328p, since it is becoming too small for future additions (see also #2). This issue summarizes some of our previous consider…
-
I'm trying to start a embassy project for a STM32G4 microcontroller from scratch, but i'm facing an persistent error.
When i use cargo embed to flash and run the code, i'm getting wrong characters fo…
-
## Introduction
The stm32 mcu has several external wakeup pins (GPIO) that are able to trigger a wakeup from Standby or Shutdown low power modes.
The WakeUp pins are fixed GPIO pins.
Each WakeUp p…
-
I think since the general idea of the hardware is up, the repository for the firmware as well the design discussions would be started.
I see this module as one of most exciting microROS over serial u…
uLipe updated
2 years ago
-
**Application using QSPI and CONFIG_MISRA_SANE=y fails to compile**
If I enable `CONFIG_MISRA_SANE=y` in `prj.conf` application fails to compile.
Target platform: STM32G4
**To Reproduce**
On…
-
with `embedded-hal` v1 the UART related traits have been removed in favour of [`embedded-io`](https://crates.io/crates/embedded-io). thus these traits should be implemented by this HAL so that the rep…
-
**Describe the bug**
STM32 devices, like L5, have a USB PHY and UCPD (USB power delivery) system. We have encountered an issue wherein disabling the UCPD node (and disabling the STM provided USBPD…
-
When calling `object::build::elf::Builder::read32(...)` on an ELF file that contains different alignments in its load sections (e.g. the below), the following error is raised: "Unsupported alignments …