-
See this file:
https://4donline.ihs.com/images/VipMasterIC/IC/SGST/SGST-S-A0004456612/SGST-S-A0004456612-1.pdf?hkey=6D3A4C79FDBF58556ACFDE234799DDF0
Page 109 for `Power supply scheme`
-
Hello,
- When using TIM1, there's a panic when trying to enable PWM output on channel 3 or 4.
- When using TIM8, there's a panic when trying to enable PWM output on anything but channel 1.
I be…
-
Hello,
I am trying to use CANopenNode into a STM32L476 device by using [libohiboard](https://github.com/ohilab/libohiboard) as HAL library. In the network, I have: (i) my board that operates as a mas…
-
Hi, there
I flash 1**2s7p\vesc_default.bin** from Vesc BMS github to Nucleo-F476 board and find it works.
But it doesn't work with LTC6811 board if I use SPI pinout from your schematic.
I rewired S…
-
**Describe the bug**
I would like to use logging RTT backend with Segger RTTViwer but it does not work. My Segger J-Link is not able to find the RTT control block. Using the same setup with another b…
-
Some filesystems don't support files and directories with hyphen on it, so it is better to replace "-" with "_" to fix it.
```
$ find . -name "*-*"
./arch/z80/src/ez80/clang-compat.asm
./arch/xt…
-
Hi. For our upcoming project, we need a USB-OTG implementation. We are using the STM32L476
I see that there is no implementation yet. I'm creating this issue as a track issue to coordinate work.
Has…
-
Espruino 是个可以下载预编译好的bin文件烧录到机子上,直接在IDE写JS文件就能在线运行的。也就是说使用者甚至不需要知道怎样编译,直接编写js程序就行。
对于业余编程人员和部分注重快速开发人员来说,目前项目的复杂度有点大了吧。
例如STM32L476的板子,用aos-cube新建好的例子项目都没法顺利编译。
毕业了就没碰过C语言了,编译和makefile什么的真心有点吃力。
…
-
Not sure this is the right place to ask but I don't know a better one:
I can't get the ADC to work. I started copying the example for STM32F4 series but when calling `adc_power_on(ADC1);` it keeps ha…
qosch updated
2 years ago
-
A few questions and then details about where I'm coming from
* whats the status of the STM32L4 port?
* do I need to edit the descriptors in the miditest example to make a windows PC recognise it?
*…