-
When you mount/unmount an SD with following config:
```
"sd.SPI_CS": "SD_CS",
"sd.SPI_MOSI": "SD_MOSI",
"sd.SPI_MISO": "SD_MISO",
"sd.SPI_CLK": "SD_CLK",
"sd.TRX_FREQUENCY": 40000000,
```
…
-
For hwmv2, there should be a match between the names and values of SoCs, this should take the form of:
```
config SOC_SERIES
default "nrf51" if SOC_SERIES_NRF51
default "nrf52" if …
-
Hi - as the title suggests on adding this custom config with a plain blink example the runtime throws a hard fault after flashing via platformi, flashing via arduino ide the exact same example wiht th…
-
We are developing the application based on zephyr version 3.1.0. We have used STM32U575ZI NUCLEO board for development. Application running without MCUboot. so, its a plain application boot time. Meas…
-
### Current situation
`Dsecure` accepts 3 possible values `Non-secure`, `Secure` and `TZ-disabled`.
### The problem
We generally use `Non-secure` and `Secure` conditions to provide Startup co…
-
**Describe the bug**
It is not possible to run TF-M samples on b_u585i_iot02a due to the 2 following issues:
- ST-SAFE should be disabled
- Regression script should not use HW reset
**To Repr…
-
It seems there is no support for STM32H5 yet. Is it currently being worked on ? If not, and if I can, I am considering to add it with the board nucleo-stm32h563zi. I see there is an stm32 folder and…
-
Hi,
I'm working on SDMMC on STM32U5 nucleo board.
Everything works fine for 1 and 4 bit mode.
But, in 8 bit mode I can write data with HAL_MMC_WriteBlocks but when I try to read back with HAL…
-
### Operating System
Linux
### Board
Custom
### Firmware
custom firmware
### What happened ?
when the function tud_task() is called, it will in its turn call tud_task_ext(UINT32_MAX, false). Th…
-
Bug Description:-
I am using nucleo_u575zi_q board and wanted to implement ADC on it. my overlay file looks as follows:-
/ {
zephyr,user {
/* adjust channel number according to pin…