-
Protoview reads my schrader sensors like a charm! However when I hit replay or save the file transmitted is not came as captured!
for example sensor ID is different(bunch of zeros).
any fix for that…
-
### Describe the bug.
Uhh I updated my flipper and there is nothing about the walkie talkie thing they added.
### Reproduction
Update your flipper
### Target
_No response_
### Logs
_No response…
-
The setMHZ function needs to also change the TEST0 register from x09 to x0B for certain frequency ranges. The CC1101 frequency ranges become out of spec if the TEST0 isn't set correctly
https://e2e…
-
As I test on many different systems ranging from 240 MHz to 4.2 GHz, using a count isn't quite useful, so I generally op for the negative value in perl5 which makes it CPU seconds
my %results = timet…
-
This was done with current Catalina and patcher as of 17 June 2023.
Target machine is a 2009 mac pro with heavy upgrades to 12 core 3.3 GHz 96 G ram, 2 x 1 TB SSD
Creating the USB stick was stra…
-
Hello,
I am trying to use Splatalogue.query_lines() to get line intensity data for a certain frequency range. When running the following code, I run into an error as shown below. It seems that the er…
-
## Introduction
This is a proposal for a minimal subset of Devicetree bindings to allow for autoconfiguration of multiple network interfaces via `DT_INST_FOREACH_STATUS_OKAY()`.
The primary rea…
-
The current Zephyr 802.15.4 driver for the CC1352R is a custom developed driver. Changing this
driver to instead use the already existing TI radio drivers will provide a more consistent interface
an…
-
@sidey79
Im Commit https://github.com/RFD-FHEM/SIGNALDuino/commit/f949589d948ac9eebd5396a2e428131c850e7d01 setzt du den Chip auf CC1101, wenn 0x17 gelesen wurde. Laut Datenblatt https://www.ti.com/p…
-
As results on Pypy, Pyinstaller is not compatible anymore with Autobahn. Is there a plan to fix this compatibility? Thanks