-
Consider implementing a speedometer / tachometer type gauge where you can set the 0 and max value. Similar to the donut but can be used for reporting network throughput or latency metrics for example.…
-
I found a cool tachometer project which reads spindle speeds up to 20k optically.
https://www.instructables.com/id/Add-an-Arduino-based-Optical-Tachometer-to-a-CNC-R/
I was thinking that this co…
-
Steps to reproduce this error:
1) run BLDC tool, select "realtime data" tab, check "activate sampling"
2) send some kind of "high duty" command to the motor (e.g. duty 0.5, rpm 4000, current 3.0A, et…
-
It seems like some domains like fleet management make a distinction between what some call *wheel-based* speed vs. the value that is displayed on the tachometer.
The vspec file's definition of the …
-
Hello! Were you able to solve this problem? Intermediate axis labels are not yet shown between 0 and 100%. Can someone help me? Thanks!
-
I was very fortunate to have found this sim racing utility several years ago. I don't remember ever exiting pit roll in over 3 years without having these overlays in use. The Tachometer, Oil Temp and…
-
Hi! Can you add a getRPM() version for Brushless Sensorless BackEMF motors, based on the frenquency and number of motor poles?
Like a get_brushless_RPM() ?
For instance, for my motor it would be…
-
As of 0.3 you can now replace the UI & stage textures in the game, **the default INI settings** will load in any texture replacements that exist inside `textures\load\` folder.
Tweaks can dump out …
-
Hello,
I have a 3018-like CNC with a grbl 1.1 board and a Chinese 12000rpm rated spindle.
I used a digital tachometer to measure the spindle speed in response to the S command, tied to different val…
-